<div class="phx-topic abstract-wrapper">The Federal Aviation Administration has eased its ban on ATR aircraft flying in icy conditions, sayi</div>

The Federal Aviation Administration has eased its ban on ATR aircraft flying in icy conditions, sayi

<div>The Federal Aviation Administration has eased its ban on ATR aircraft flying in icy conditions, saying the ban would now only apply to flights during freezing rain or freezing drizzle.The original restriction was imposed on the French-Italian ATRs on Dec. 9 following the October crash of an ATR-72 in Indiana, killing 68 people. Icy conditions were believed to have contributed to the crash.FAA Administrator David Hinson said Wednesday that the new conditionsallow ATRs to fly in known or forecast icing conditions as long as pilots and operators follow new flight safety and training procedures.He added that pilots of the widely...

The Federal Aviation Administration has eased its ban on ATR aircraft flying in icy conditions, saying the ban would now only apply to flights during freezing rain or freezing drizzle. The original restriction was imposed on the French-Italian ATRs on Dec. 9 following the October crash of an ATR-72 in Indiana, killing 68 people. Icy conditions were believed to have contributed to the crash.FAA Administrator David Hinson said Wednesday that the new conditions allow ATRs to fly in known or forecast icing conditions as long as pilots and operators follow new flight safety and training procedures. He added that pilots of the widely used turboprop planes - about 150 are flown by regional airlines in the United States - must receive training on aircraft operations and weather procedures before they may fly the craft in icing conditions. The FAA said the new procedures would take effect immediately. FAA officials took the action following an analysis of data gathered from test flights in France and icing conditions at Edwards Air Force Base in California.

FAA EASES RESTRICTIONS ON ATRS FLYING UNDER ICY CONDITIONS

<div class="phx-topic abstract-wrapper">Unstructured data, security concerns and value questions are holding back the progression of technology in the breakbulk industry.</div>

Unstructured data, security concerns and value questions are holding back the progression of technology in the breakbulk industry.

Feature image

<div class="phx-topic">The project cargo industry has only just started to voyage down the path of uncovering how artificial intelligence (AI) may help it become more efficient, stakeholders in the sector tell the Journal of Commerce.While AI is taking hold of most categories of cargo movement – from AI agents powering domestic truckload brokers to pricing optimization tools for global forwarders – the project and breakbulk sectors are lagging.Part of the lack of overall readiness for AI adoption in project logistics is that the industry still struggles to maintain clean and structured data, a prerequisite for most AI use cases.“One of the fundamental challenges is people look at AI as tools,” said Adolph Colaco, CEO of e2log, a software vendor catering to industrial and project cargo shippers. “But you need to have your master data cleaned, you need standard nomenclatures.” And with different enterprise resource planning systems, trade compliance systems and systems added through mergers and acquisitions, “you cannot accomplish what you want with AI unless you get the foundational data cleaned, structured [and] put on a digital platform,” Colaco added. “Only then will AI work.”Two hurdles to technology adoption in the project cargo space are especially problematic when it comes to AI. First, cargo movement is not as consistent or repeatable as in other sectors, a problem of scale that has inhibited all but a handful of vendors from building management and execution tools for project shippers.Secondly, shippers are generally happy to hand complexity off to forwarders, which exacerbates a lack of understanding of AI for many shippers.“Speaking to an [engineering, procurement and construction] client recently on this very topic, while they have major interest in the potential of AI -- in the design and predictability space -- there are major question marks in terms of security,” said Tim Killen, head of growth/sector at the forwarder Fracht. “And this seems to be echoed with key stakeholders involved in the complex, proprietary technology-based capex project value chain. But tech moves fast, faster than us project guys do, so let’s see.”Killen said “it’s likely” that AI will have little impact in project logistics execution in the short term.“But its potential functionality, benefit and development will be where we need to explore as an industry to understand how this could be utilized in the future,” he said.Colaco said e2log has long used AI on the development side, but it hasn’t focused on providing AI tools to customers because “most are not asking about AI functionality in the platform as of now but want to know the AI roadmap.”e2log is working with a customer on narrowing down how AI could help identify exceptions across a high volume of shipments more effectively, or to query a database using a so-called AI agent for a piece of information that would normally require a broader report to be run.“They want us to use AI to narrow down the focus, to understand what’s happening with shipments that could slow down a project schedule,” Colaco said.<h3>Project shippers still on the fence</h3>Shippers continue to search for value from AI, whether solving problems or creating efficiencies, but can be hesitant to commit.“My indifference towards AI is that I often struggle to see how it really applies to the breakbulk industry and if it really brings any value,” an industry source who did not want to be identified told the Journal of Commerce. “AI needs to be something that can be applied now and bring value, and I see early AI adoption as something that will not do our jobs for us, but rather tools that will make our jobs easier.”The source said AI tools are already prevalent in the broader supply chain management environment via tools that help identify and evaluate supply chain resilience or forecast and plan inventory.“The challenge is how do we bring similar immediate value to the breakbulk industry?” he said.Ritesh Nair, vice president and global sales director at Rhenus Project Logistics USA, wrote in a blog in September that “while AI is still in its infancy, the more it is used, the better it will get.”“The middle part of the 2020s will be looked back upon as a defining moment in history that changed the way we did things,” Nair wrote. “The field of supply chain, specifically project logistics, is no exception.”He specifically noted that AI could impact product design and transport engineering.“Having AI collate data on project site location -- route information, bridges along the route, port capabilities and regional geopolitical news -- can yield not only the optimum route, but also where to manufacture and the best mode of transport to get it to the project site,” Nair wrote.<h3>Sector banks on AI power project support</h3>While the project and breakbulk industry wrestles with how to adopt and deploy AI, it is likely it will benefit from demand for AI-enabled solutions across all industries.“If you start to look into the power needs of that sector, it's astounding the amount of power that's going to be needed for the data centers, for chip manufacturing and now for [the Trump administration’s planned $500 billion] AI project,” John Hark, a director at Bertling Logistics and an adjunct professor at Texas A&amp;M at Galveston, said on a January Journal of Commerce webcast. “The power is going to have to come from somewhere...That's good for the project market, because we're going to continue to see these power projects, transformer projects and transmission line projects.”Colaco, meanwhile, said he only sees some shippers having the technological maturity and desire to take on the digitalization required to get the most out of AI-based solutions.“It’s a smaller subset of shippers,” he said. “Most think of AI as tools and if my forwarder has it, let me just use those.”Contact Eric Johnson at <a href="mailto:eric.johnson@spglobal.com">eric.johnson@spglobal.com</a></div>

The project cargo industry has only just started to voyage down the path of uncovering how artificial intelligence (AI) may help it become more efficient, stakeholders in the sector tell the Journal of Commerce. While AI is taking hold of most categories of cargo movement – from AI agents powering domestic truckload brokers to pricing optimization tools for global forwarders – the project and breakbulk sectors are lagging. Part of the lack of overall readiness for AI adoption in project logistics is that the industry still struggles to maintain clean and structured data, a prerequisite for most AI use cases. “One of the fundamental challenges is people look at AI as tools,” said Adolph Colaco, CEO of e2log, a software vendor catering to industrial and project cargo shippers. “But you need to have your master data cleaned, you need standard nomenclatures.” And with different enterprise resource planning systems, trade compliance systems and systems added through mergers and acquisitions, “you cannot accomplish what you want with AI unless you get the foundational data cleaned, structured [and] put on a digital platform,” Colaco added. “Only then will AI work.” Two hurdles to technology adoption in the project cargo space are especially problematic when it comes to AI. First, cargo movement is not as consistent or repeatable as in other sectors, a problem of scale that has inhibited all but a handful of vendors from building management and execution tools for project shippers. Secondly, shippers are generally happy to hand complexity off to forwarders, which exacerbates a lack of understanding of AI for many shippers. “Speaking to an [engineering, procurement and construction] client recently on this very topic, while they have major interest in the potential of AI -- in the design and predictability space -- there are major question marks in terms of security,” said Tim Killen, head of growth/sector at the forwarder Fracht. “And this seems to be echoed with key stakeholders involved in the complex, proprietary technology-based capex project value chain. But tech moves fast, faster than us project guys do, so let’s see.” Killen said “it’s likely” that AI will have little impact in project logistics execution in the short term. “But its potential functionality, benefit and development will be where we need to explore as an industry to understand how this could be utilized in the future,” he said. Colaco said e2log has long used AI on the development side, but it hasn’t focused on providing AI tools to customers because “most are not asking about AI functionality in the platform as of now but want to know the AI roadmap.” e2log is working with a customer on narrowing down how AI could help identify exceptions across a high volume of shipments more effectively, or to query a database using a so-called AI agent for a piece of information that would normally require a broader report to be run. “They want us to use AI to narrow down the focus, to understand what’s happening with shipments that could slow down a project schedule,” Colaco said. Project shippers still on the fence Shippers continue to search for value from AI, whether solving problems or creating efficiencies, but can be hesitant to commit. “My indifference towards AI is that I often struggle to see how it really applies to the breakbulk industry and if it really brings any value,” an industry source who did not want to be identified told the Journal of Commerce. “AI needs to be something that can be applied now and bring value, and I see early AI adoption as something that will not do our jobs for us, but rather tools that will make our jobs easier.” The source said AI tools are already prevalent in the broader supply chain management environment via tools that help identify and evaluate supply chain resilience or forecast and plan inventory. “The challenge is how do we bring similar immediate value to the breakbulk industry?” he said. Ritesh Nair, vice president and global sales director at Rhenus Project Logistics USA, wrote in a blog in September that “while AI is still in its infancy, the more it is used, the better it will get.” “The middle part of the 2020s will be looked back upon as a defining moment in history that changed the way we did things,” Nair wrote. “The field of supply chain, specifically project logistics, is no exception.” He specifically noted that AI could impact product design and transport engineering. “Having AI collate data on project site location -- route information, bridges along the route, port capabilities and regional geopolitical news -- can yield not only the optimum route, but also where to manufacture and the best mode of transport to get it to the project site,” Nair wrote. Sector banks on AI power project support While the project and breakbulk industry wrestles with how to adopt and deploy AI, it is likely it will benefit from demand for AI-enabled solutions across all industries. “If you start to look into the power needs of that sector, it's astounding the amount of power that's going to be needed for the data centers, for chip manufacturing and now for [the Trump administration’s planned $500 billion] AI project,” John Hark, a director at Bertling Logistics and an adjunct professor at Texas A&M at Galveston, said on a January Journal of Commerce webcast. “The power is going to have to come from somewhere...That's good for the project market, because we're going to continue to see these power projects, transformer projects and transmission line projects.” Colaco, meanwhile, said he only sees some shippers having the technological maturity and desire to take on the digitalization required to get the most out of AI-based solutions. “It’s a smaller subset of shippers,” he said. “Most think of AI as tools and if my forwarder has it, let me just use those.” Contact Eric Johnson at eric.johnson@spglobal.com

Logistics Technology News

Breakbulk carriers

Project cargo

Breakbulk News

Project cargo sector disadvantaged by lag in AI adoption

<div class="phx-topic abstract-wrapper">Regulatory uncertainty around the allowance of digital trade documents is one factor that has slowed the adoption of electronic bills of lading in the shipping industry. </div>

Regulatory uncertainty around the allowance of digital trade documents is one factor that has slowed the adoption of electronic bills of lading in the shipping industry.

<div class="phx-topic">Vendors eager to push adoption of electronic bills of lading (eBLs) in the container shipping industry received a boost Tuesday with the International Group of P&amp;I Clubs (IGP&amp;I) relaxing the approval process for such systems from Feb. 20. The group said in a notice Tuesday that vendors providing eBL products will be “deemed approved” if they are subject to a jurisdiction that gives legal recognition to eBLs as equivalent to paper bills of lading. To be deemed approved for use, the vendors must be served by electronic trading systems where a digital transfer of title, rights and liabilities is permitted. The move by IGP&amp;I, whose members collectively provide marine liability cover for approximately 90% of the world's ocean-going tonnage, is an encouraging development for eBL advocates, who have seen slow adoption due to a range of regulatory and commercial factors. One of those factors is the complex web of international regulations governing electronic trade documents, with some countries having long ago approved such mechanisms while others have dragged their feet. Getting approval for systems that enable eBL generation and transfer from insurers could assuage some of the reluctance from shippers, forwarders and shipping lines to gravitate toward digital documentation. <h3>UK law provided the impetus </h3>The IGP&amp;I said the move to streamline the approval process for eBL vendors was influenced by the 2023 passage of the UK‘s Electronic Trade Documents Act, which gave legal recognition in English law to electronic trade documents, including e-bills. Urgency around the shift to eBLs is driven by a commitment from nine of the top 10 global ocean carriers to fully migrate to eBLs by 2030. The other carrier in the top 10, COSCO, is not part of that commitment, but is seen as one of the more active advocates for digital documentation. In theory, the process making it easier for eBL vendors to be approved by IGP&amp;I should accelerate both usage of eBLs and the number of companies addressing it. IGP&amp;I already has a vetted list of 13 approved vendors, including the most commonly used eBL providers such as WaveBL, Bolero, IQAX, CargoX and ICE Digital Trade. Industry sources have suggested to the Journal of Commerce there is likely to be consolidation within the eBL vendor landscape, simply because there is not enough business to support dozens of vendors even as the industry moves toward its 100% commitment by 2030. Contact Eric Johnson at eric.johnson@spglobal.com. </div>

Vendors eager to push adoption of electronic bills of lading (eBLs) in the container shipping industry received a boost Tuesday with the International Group of P&I Clubs (IGP&I) relaxing the approval process for such systems from Feb. 20. The group said in a notice Tuesday that vendors providing eBL products will be “deemed approved” if they are subject to a jurisdiction that gives legal recognition to eBLs as equivalent to paper bills of lading. To be deemed approved for use, the vendors must be served by electronic trading systems where a digital transfer of title, rights and liabilities is permitted. The move by IGP&I, whose members collectively provide marine liability cover for approximately 90% of the world's ocean-going tonnage, is an encouraging development for eBL advocates, who have seen slow adoption due to a range of regulatory and commercial factors. One of those factors is the complex web of international regulations governing electronic trade documents, with some countries having long ago approved such mechanisms while others have dragged their feet. Getting approval for systems that enable eBL generation and transfer from insurers could assuage some of the reluctance from shippers, forwarders and shipping lines to gravitate toward digital documentation. UK law provided the impetus The IGP&I said the move to streamline the approval process for eBL vendors was influenced by the 2023 passage of the UK‘s Electronic Trade Documents Act, which gave legal recognition in English law to electronic trade documents, including e-bills. Urgency around the shift to eBLs is driven by a commitment from nine of the top 10 global ocean carriers to fully migrate to eBLs by 2030. The other carrier in the top 10, COSCO, is not part of that commitment, but is seen as one of the more active advocates for digital documentation. In theory, the process making it easier for eBL vendors to be approved by IGP&I should accelerate both usage of eBLs and the number of companies addressing it. IGP&I already has a vetted list of 13 approved vendors, including the most commonly used eBL providers such as WaveBL, Bolero, IQAX, CargoX and ICE Digital Trade. Industry sources have suggested to the Journal of Commerce there is likely to be consolidation within the eBL vendor landscape, simply because there is not enough business to support dozens of vendors even as the industry moves toward its 100% commitment by 2030. Contact Eric Johnson at eric.johnson@spglobal.com.

Container lines

Forwarding

Transport, Trade and Regulation News

Marine insurer group greenlights streamlined eBL vendor approval process

<div class="phx-topic abstract-wrapper">The ocean carrier is diving into domestic intermodal logistics for shippers sending freight from inland markets to the West Coast.</div>

The ocean carrier is diving into domestic intermodal logistics for shippers sending freight from inland markets to the West Coast.

<div class="phx-topic">Ocean Network Express (ONE) and logistics provider LX Pantos have formed a joint venture that will offer shippers the opportunity to move freight from inland US markets to the US West Coast in ocean containers rather than 53-foot domestic boxes. The joint venture, called Boxlinks, would benefit inland shippers because the westbound rates using an ocean container are often cheaper than using a domestic container. “Through Boxlinks, we are transforming how we deliver value in the United States,” Hiroki Tsujii, head of product and network at ONE, said in a statement. “We will build a more resilient and agile inland network that will benefit our customers in the domestic market.” The service being offered by ONE and LX Pantos is known as a domestic repositioning program, which refers to logistics providers who market ocean containers to shippers in cities such as Chicago, Dallas, Memphis or the Ohio Valley who send freight on rail to the West Coast. For example, if there is a shipper in Anaheim, Calif., the inland logistics company would fill the ocean container with domestic cargo to the West Coast. Once at the destination, a trucker would deliver the freight to the company in Anaheim to unload immediately. Upon unloading, the driver would bring the emptied container to the Port of Long Beach, for example. Companies like Interdom and Roar Logistics have contracted with ocean carriers on domestic repositioning programs for decades, but ONE’s joint venture is a major foray into the marketplace. Some shippers don’t like domestic repositioning programs because ocean carriers may restrict capacity when they want containers to remain close to the ports, thus reducing the supply of boxes inland. Nevertheless, domestic repositioning programs deliver benefits for many supply chain stakeholders. The ocean carrier gets a revenue-paying load to offset its costs; when a carrier ships a container to the West Coast, it still must pay BNSF Railway or Union Pacific Railroad, even if the box is empty. Shippers benefit because the ocean carrier isn’t concerned with profiting on the load as much as just offsetting costs, so the westbound rates are often lower than using domestic 53-foot containers. The logistics company benefits from an additional revenue stream within a larger portfolio of US services such as truck brokerage. For example, Roar Logistics also is a non-vessel operating common carrier (NVO) and provides airfreight and truckload non-asset brokerage. Contact Ari Ashe at <a href="mailto:ari.ashe@spglobal.com">ari.ashe@spglobal.com</a></div>

Ocean Network Express (ONE) and logistics provider LX Pantos have formed a joint venture that will offer shippers the opportunity to move freight from inland US markets to the US West Coast in ocean containers rather than 53-foot domestic boxes. The joint venture, called Boxlinks, would benefit inland shippers because the westbound rates using an ocean container are often cheaper than using a domestic container. “Through Boxlinks, we are transforming how we deliver value in the United States,” Hiroki Tsujii, head of product and network at ONE, said in a statement. “We will build a more resilient and agile inland network that will benefit our customers in the domestic market.” The service being offered by ONE and LX Pantos is known as a domestic repositioning program, which refers to logistics providers who market ocean containers to shippers in cities such as Chicago, Dallas, Memphis or the Ohio Valley who send freight on rail to the West Coast. For example, if there is a shipper in Anaheim, Calif., the inland logistics company would fill the ocean container with domestic cargo to the West Coast. Once at the destination, a trucker would deliver the freight to the company in Anaheim to unload immediately. Upon unloading, the driver would bring the emptied container to the Port of Long Beach, for example. Companies like Interdom and Roar Logistics have contracted with ocean carriers on domestic repositioning programs for decades, but ONE’s joint venture is a major foray into the marketplace. Some shippers don’t like domestic repositioning programs because ocean carriers may restrict capacity when they want containers to remain close to the ports, thus reducing the supply of boxes inland. Nevertheless, domestic repositioning programs deliver benefits for many supply chain stakeholders. The ocean carrier gets a revenue-paying load to offset its costs; when a carrier ships a container to the West Coast, it still must pay BNSF Railway or Union Pacific Railroad, even if the box is empty. Shippers benefit because the ocean carrier isn’t concerned with profiting on the load as much as just offsetting costs, so the westbound rates are often lower than using domestic 53-foot containers. The logistics company benefits from an additional revenue stream within a larger portfolio of US services such as truck brokerage. For example, Roar Logistics also is a non-vessel operating common carrier (NVO) and provides airfreight and truckload non-asset brokerage. Contact Ari Ashe at ari.ashe@spglobal.com

North American ports

North-American rail

ONE launches domestic repositioning program on inland loads to West Coast

<div class="phx-topic abstract-wrapper">The most significant drop will take place in the second half of the month after Lunar New Year, with about 7% of the lost capacity attributed to a short month and “gaps in service handoffs,” according to maritime intelligence firm eeSea. </div>

The most significant drop will take place in the second half of the month after Lunar New Year, with about 7% of the lost capacity attributed to a short month and “gaps in service handoffs,” according to maritime intelligence firm eeSea.

<div class="phx-topic">The restructuring of carrier alliances is causing a short-term capacity shift in the trans-Pacific, giving cargo owners about 20% more functional capacity this month compared with a year ago but still 8% less than in January, according to analysis by maritime intelligence firm eeSea. eeSea’s forecast has the number of services on the eastbound trans-Pacific increasing by four to 53 in February. And although services are increasing, functional capacity on the trade lane will decrease. “A spike in total service versions should not mislead anyone to think there will be an equal spike in capacity,” eeSea said in its Far East-West Coast North America trade lane review published Jan. 31. As services get reorganized, the most significant drop in capacity will take place in the second half of February after Lunar New Year, with about 7% of the lost capacity attributed to a short month and “gaps in service handoffs,” eeSea said. Amid the capacity shift, several sources cited congestion at Chinese ports, including Shanghai and Ningbo, at the start of the Lunar New Year holiday. The slowdowns at origin are further tying up functional capacity, widening the impact of the simultaneous alliance revisions. Stephen Nothdurft, vice president of North American sales at forwarder MOL Consolidation Service, said some of the congestion can be attributed to cargo arriving at Chinese ports too close to the holiday, with a lack of vessel space to serve the cargo during the alliance reshuffling. “The late product combined with the reshuffling just added a little bit of chaos,” said Nothdurft. The eeSea report attributes the dip in February capacity to several factors, including “heavily delayed arrivals on service versions on their way out, blank sailings announced for the 2025 Lunar New Year, the shorter [month] and gaps caused by some alliance services petering out as early as December whilst others have had their start dates pushed back.” Overall, forecast blank sailings from eeSea remain conservative for February, with only four on the books as of now, down from 19 in January and compared with seven expected in March. With the temporary market influences expected to wane, eeSea data suggests that trans-Pacific capacity will stabilize at normal levels by the second quarter. “The capacity slump normalizes back to pre-transition values in the [approximate] 330,000 TEU range by the time we reach week 13 at the end of March,” eeSea said. Contact Laura Robb at <a href="mailto:Laura.Robb@spglobal.com">laura.robb@spglobal.com</a>.  </div>

The restructuring of carrier alliances is causing a short-term capacity shift in the trans-Pacific, giving cargo owners about 20% more functional capacity this month compared with a year ago but still 8% less than in January, according to analysis by maritime intelligence firm eeSea. eeSea’s forecast has the number of services on the eastbound trans-Pacific increasing by four to 53 in February. And although services are increasing, functional capacity on the trade lane will decrease. “A spike in total service versions should not mislead anyone to think there will be an equal spike in capacity,” eeSea said in its Far East-West Coast North America trade lane review published Jan. 31. As services get reorganized, the most significant drop in capacity will take place in the second half of February after Lunar New Year, with about 7% of the lost capacity attributed to a short month and “gaps in service handoffs,” eeSea said. Amid the capacity shift, several sources cited congestion at Chinese ports, including Shanghai and Ningbo, at the start of the Lunar New Year holiday. The slowdowns at origin are further tying up functional capacity, widening the impact of the simultaneous alliance revisions. Stephen Nothdurft, vice president of North American sales at forwarder MOL Consolidation Service, said some of the congestion can be attributed to cargo arriving at Chinese ports too close to the holiday, with a lack of vessel space to serve the cargo during the alliance reshuffling. “The late product combined with the reshuffling just added a little bit of chaos,” said Nothdurft. The eeSea report attributes the dip in February capacity to several factors, including “heavily delayed arrivals on service versions on their way out, blank sailings announced for the 2025 Lunar New Year, the shorter [month] and gaps caused by some alliance services petering out as early as December whilst others have had their start dates pushed back.” Overall, forecast blank sailings from eeSea remain conservative for February, with only four on the books as of now, down from 19 in January and compared with seven expected in March. With the temporary market influences expected to wane, eeSea data suggests that trans-Pacific capacity will stabilize at normal levels by the second quarter. “The capacity slump normalizes back to pre-transition values in the [approximate] 330,000 TEU range by the time we reach week 13 at the end of March,” eeSea said. Contact Laura Robb at laura.robb@spglobal.com . 

Container Shipping News

Trans-Pacific

Carrier alliance shifting causes February dip in trans-Pacific vessel capacity

<div class="phx-topic abstract-wrapper">The latest move by the port involves a proposal by intermodal logistics provider IntermodeX to develop a transload facility near Prince Rupert’s Fairview Container Terminal that is designed to primarily attract import containers.</div>

The latest move by the port involves a proposal by intermodal logistics provider IntermodeX to develop a transload facility near Prince Rupert’s Fairview Container Terminal that is designed to primarily attract import containers.

<div class="phx-topic">The intermodal logistics provider IntermodeX will develop a transload and logistics facility near the Port of Prince Rupert in western Canada that will be the latest component of the port authority’s master plan to expand import and export transload operations. Phase 1 of the logistics facility, known as LinX, is scheduled to open in the first quarter of 2027, the port said in a statement Monday. The 33-acre facility will be located close to Prince Rupert’s Fairview Container Terminal and Canadian National Railway’s (CN’s) intermodal hub. CN provides intermodal rail service linking Prince Rupert to Eastern Canada and Chicago. The port is working with private developers to build transload facilities designed to attract imports and exports by enhancing the efficiency of shipping through the British Columbia gateway. “It is imperative to offer customers robust logistics services including trucking, transloading and rail as we increase our competitiveness and grow container volumes at the Port of Prince Rupert,” Shaun Stevenson, president and CEO of the port authority, said in the statement. Prince Rupert handled 531,172 laden TEUs in 2024, a 7% increase over 2023. Laden imports, which accounted for about 77% of the port’s total container volume, increased 8%, while exports were up about 5%, according to port data. <h3>Prince Rupert promoting import, export transloading </h3>The LinX logistics facility will primarily handle containerized imports transloaded from 40-foot marine containers into 53-foot domestic containers for shipment to the eastern half of North America via CN, Matthew May, president of IntermodeX, told the Journal of Commerce. IntermodeX, a subsidiary of SSA Marine, operates transload operations throughout British Columbia, including Vancouver and Prince Rupert. Most of the marine containers unloaded at the LinX facility will be shipped back empty to Asia on an expedited basis to be reloaded with import merchandise, rather than being shipped intact to interior destinations in Canada and the US where they may sit for weeks, May said. “We can turn that box almost [vessel] string to string,” May said, referencing the expedited nature of the operation. However, given Prince Rupert’s heavy reliance on imported merchandise from Asia, the port is also promoting transload operations that will attract exports, said Brian Friesen, vice president of trade development at the Prince Rupert Port Authority. CANXPORT, <a href="https://www.joc.com/article/prince-rupert-export-infrastructure-project-secures-canadian-government-loan-5221465">a transload export facility under construction on the port’s Ridley Island</a>, is scheduled for completion in the third quarter of 2026. A portion of the marine containers carrying imports will be unloaded and trucked a short distance to the CANXPORT facility to be filled with export commodities, Friesen said. Ray-Mont Logistics will develop and operate the facility on a 108-acre site. Prince Rupert is cooperating with the Canadian government and private developers to expand its transloading operations. Friesen said that transloading to date represents a “marginal share” of the port’s total container volume. Contact Bill Mongelluzzo at <a href="mailto:bill.mongelluzzo@spglobal.com">bill.mongelluzzo@spglobal.com</a>.</div>

The intermodal logistics provider IntermodeX will develop a transload and logistics facility near the Port of Prince Rupert in western Canada that will be the latest component of the port authority’s master plan to expand import and export transload operations. Phase 1 of the logistics facility, known as LinX, is scheduled to open in the first quarter of 2027, the port said in a statement Monday. The 33-acre facility will be located close to Prince Rupert’s Fairview Container Terminal and Canadian National Railway’s (CN’s) intermodal hub. CN provides intermodal rail service linking Prince Rupert to Eastern Canada and Chicago. The port is working with private developers to build transload facilities designed to attract imports and exports by enhancing the efficiency of shipping through the British Columbia gateway. “It is imperative to offer customers robust logistics services including trucking, transloading and rail as we increase our competitiveness and grow container volumes at the Port of Prince Rupert,” Shaun Stevenson, president and CEO of the port authority, said in the statement. Prince Rupert handled 531,172 laden TEUs in 2024, a 7% increase over 2023. Laden imports, which accounted for about 77% of the port’s total container volume, increased 8%, while exports were up about 5%, according to port data. Prince Rupert promoting import, export transloading The LinX logistics facility will primarily handle containerized imports transloaded from 40-foot marine containers into 53-foot domestic containers for shipment to the eastern half of North America via CN, Matthew May, president of IntermodeX, told the Journal of Commerce. IntermodeX, a subsidiary of SSA Marine, operates transload operations throughout British Columbia, including Vancouver and Prince Rupert. Most of the marine containers unloaded at the LinX facility will be shipped back empty to Asia on an expedited basis to be reloaded with import merchandise, rather than being shipped intact to interior destinations in Canada and the US where they may sit for weeks, May said. “We can turn that box almost [vessel] string to string,” May said, referencing the expedited nature of the operation. However, given Prince Rupert’s heavy reliance on imported merchandise from Asia, the port is also promoting transload operations that will attract exports, said Brian Friesen, vice president of trade development at the Prince Rupert Port Authority. CANXPORT, a transload export facility under construction on the port’s Ridley Island , is scheduled for completion in the third quarter of 2026. A portion of the marine containers carrying imports will be unloaded and trucked a short distance to the CANXPORT facility to be filled with export commodities, Friesen said. Ray-Mont Logistics will develop and operate the facility on a 108-acre site. Prince Rupert is cooperating with the Canadian government and private developers to expand its transloading operations. Friesen said that transloading to date represents a “marginal share” of the port’s total container volume. Contact Bill Mongelluzzo at bill.mongelluzzo@spglobal.com .

Port News

Maritime

Prince Rupert promoting transload operations to improve logistics efficiency

Access Journal of Commerce content for 30 days

Free Trial - Wide Box

START A FREE TRIAL TODAY

Choose a subscription plan that works best for you.

Subscribe Now - Anonymous - Wide Box

SUBSCRIBE TODAY

Use code STSW20 at checkout and save 20% on first year of any annual subscription plan.

Subscribe Now - Free Trials - Wide Box

SUBSCRIBE AND SAVE

Register today to redeem your Gold subscriber discount!

TPM Discount - Gold

Save 20% on TPM25

Use code GUW795 at checkout and save $700 on first year of a Gold subscription. 

Upgrade Subscription - Wide Box

UPGRADE TODAY AND SAVE

The world of LTL is slow to embrace change. Business anachronisms permeate current supply chain processes. These vestiges of the way things used to work define the LTL freight transportation procurement process of many modern shippers.David Knuth, logistics specialist at IEWC, a global supplier of cable and wire based in Wisconsin, is happy to have modernized the RFP process, automating the entire LTL bidding procedure with Bid$ense, SMC³’s automated truckload and LTL freight transportation sourcing solution. But when prompted, he can still recall what once was.In his previous job, a large part of his duties were consumed by creating an intermodal bid package for carriers. In a spreadsheet, Knuth detailed the company’s volumes lane by lane, taking care to delete any errant keystrokes or misleading data. He would then email out the information to each carrier, taking time to respond to detailed technical questions about the spreadsheet data. Finally, he had to compile all the results, create an algorithm that would compare the carriers on each lane, and award the business.“It was a huge undertaking. It took about four months to do,” Knuth said of the old process. “It was almost a full-time job for that part of the year, every year.”In his new job at IEWC, he sat down with Bid$ense on day one and was amazed at the capabilities. Knuth had never before used a bid tool. SMC³’s latest versions of Bid$ense automate the process even further, taking truckload and LTL RFPs entirely online. The tool draws on RFP best-practices protocols to streamline the bidding communication process, enabling bidding carriers to respond accurately and promptly to shipper requests. The solution also does all the distribution work automatically, electronically submitting shipper bid data to carriers based on their actual service capabilities and performance records. Carriers are alerted with timely prompts for RFP deliverables, so shippers aren’t waiting by the phone for responses.Another benefit of automating the process is the data-cleansing assistance. When Knuth sent spreadsheets to carriers, data errors might cloud the bidding process; he might have to resend data or simply accept a price that did not truly reflect the costs of doing business. Data cleansing is incredibly beneficial, he said.The spreadsheet technique also made bidding analysis an onerous task. Since Bid$ense automates and streamlines the entire RFP process, intensive examination is now simple. SMC³ knows that each bid has more than one best outcome. With uniform responses from each carrier, shippers can quickly rank results and create an unlimited quantity of what-if scenarios to make the optimal procurement decision.Jesse Burnett of Central Garden &amp; Pet experiences many of the same benefits. Founded in 1980, Central Garden &amp; Pet has spent the last three decades growing from a small garden supply company to a provider of a range of products from dog chews and bird seed to soil supplements and natural insecticides. For much of its life, the company shipped these disparate goods via LTL and truckload carriers to retailers throughout the country, relying on each business unit to negotiate directly with their freight transportation providers. This arrangement worked fairly well for a small company, but as Central Garden &amp; Pet expanded, leadership decided to consolidate decision making.Burnett helped centralize the transportation decision making in 2015 with SMC³’s Bid$ense. Before Bid$ense, every business unit operated independently as far as negotiating with carriers.“There were a lot of different things just floating around,” he said. “We didn’t have master agreements in place; no national pricing at all. The pricing from carriers was just all over the place, depending on where you were.”The transformations he saw with Bid$ense were immediate. Burnett has been using the tool about every other year since its implementation at the company. Central Garden and Pet’s $19.6 million 2019 LTL bid saved the company just more than 9 percent when compared to its historical average. For Burnett, though, bid automation extends far beyond savings.“We knew that we weren’t getting the best pricing offer from our carriers just because nothing was centralized,” he continued. “We knew that if we combined everything from all these business units and paired it with one corporate offering, then it would drive some cost benefit with it.”When the company initially decided to centralize bid procurement, executives researched a number of different methodologies and technologies. In the end, though, Burnett found that Bid$ense was both widespread and well known, and that his carrier partners already knew how to use the application. Burnett also highlighted the data-cleansing process as a major benefit, saying the rigorous process ensures that carriers always return the best price.“It definitely has helped drive savings,” he said. “Any time you go out there and you drive that competitiveness with the carriers and they know they’re in a bid environment, it seems to sharpen their pencils.”Transportation procurement is an integral part of the modern supply chain. With Bid$ense, shippers can develop a strategic implementation plan that saves them time and money, but also helps them create strong relationships with their carrier partners. These carriers appreciate the solution’s data-cleansing process; when carriers receive a complete shipment history and future volume forecast, they don’t have to guess on pricing. Carriers that receive more data from shippers get a complete picture of that shipper’s freight, allowing them to accurately plan instead of simply preparing for the worst-case scenario. Clean data presented through an automated system can lead to both bigger shipment savings and a lasting partnership between carrier and customer.Whether customers are looking to streamline over-the-road transportation bidding by automating the RFP process or create an entirely new, centralized sourcing process, Bid$ense has the analytical horsepower to get the job done.SMC³ 2020 Customer Case Study

SMC3rates_shutterstock_5247046.jpg

Shippers save money, time with automated transportation bidding tools

If there’s one immutable truth in the world of logistics, it’s this: LTL is an inherently complex form of transportation. Tariffs, rates, DIM weights, transit times — it’s enough to confuse even seasoned logistics professionals. The solution to this knowledge gap has historically been on-the-job training or university supply chain education, but for a variety of reasons there is now a pressing need for third-party, remote LTL training that prepares logistics workers for transportation success. Global Scope Can Overlook Local Intricacies In the past, professionals looking to move into a supply chain career learned about the basics of supply chain from universities. However, many of these college supply chain programs are now global in scope, focusing on worldwide supply chain management instead of the intricacies of specialized domestic transportation. And even these programs, which used to be widespread, are becoming less common. LTL is not an industry of broad-brush strokes; supply chain professionals really need a pointillistic understanding of the logistics of LTL in order to excel in the industry. Accelerating Need for Dedicated LTL Education This lack of specified training put the onus on employers to prepare new hires with the LTL knowledge needed to do their jobs. Dedicated LTL study is a necessity, not a luxury. At the same time, changes in LTL and the broader supply chain world are accelerating. The reliance on e-commerce has ballooned since the start of the pandemic, and last-mile LTL shipments and related e-commerce strains on the supply chain won’t diminish once social distancing abates. That genie isn’t going back into the bottle. So supply chain employers need logistics workers that are fully versed in all aspects of the industry, ready to solve unique shipping and delivery problems based on their extensive supply chain knowledge But why care about LTL? It’s been reported that some shippers in today’s world are no longer concerned with what mode is used to ship their goods. A Multimodal Approach Ensures On-Time Delivery This mode agnosticism means supply chain stakeholders have to be well versed in all modes of transportation. As unforeseen weather events and other disruptions, such as protests, become more common, savvy logistics employees will need to be armed with familiarity of all modes, not just the most popular, to ensure that freight is delivered on time, without damage, and in the most financially expedient way possible. Offerings like SMC³’s LTL online education courses cover a wide range of topics from LTL basics and operations to more advanced concepts like pricing analytics and transportation law. The company also has plans to continually refresh content, adding new expert presenters and taking the feedback of students to make the courses even better as time goes on. Learn more about&nbsp;<a href="https://logisticstrainingcenter.com/smc3-courses/" rel="noreferrer" class="joc_admin__link">SMC³’s LTL Online Education program</a>&nbsp;and view the 2021 hybrid schedule, featuring live industry experts,&nbsp;<a href="https://www.smc3.com/onlinelearning2021/" rel="noreferrer" class="joc_admin__link">here.</a>

SMC3rates_shutterstock_5247046 (1).jpg

Filling the Supply Chain Education Gap with LTL Education Courses

UPGRADE AND SAVE: Use code GUW795 at checkout and save $700 on first year of a Gold subscription. 

Upgrade Subscription - Offer Box

Upgrade Subscription

20% OFF ON TPM25: Register today and redeem your Gold subscriber discount!

TPM Discount - Gold 

20% OFF ON TPM25

SUBSCRIBE TODAY: Choose a subscription plan that works best for you.

Subscribe Now - Anonymous - Offer Box

Subscribe Today

START A FREE TRIAL: Access Journal of Commerce content for 30 days

Free Trial - Offer Box

Free Trial

SUBSCRIBE AND SAVE: Use code STSW20 at checkout to save 20% on first year of any subscription plan.


Subscribe Now - Free Trials - Offer Box

An in-depth analysis of transport trends in the multipurpose and heavy-lift fleet segment

Breakbulk Report - Rectangle Box

Breakbulk Quarterly

Customers scoring their intermodal partners to identify the best service providers

Intermodal Service Scorecard - Rectangle Box

Intermodal Service Scorecard

The only editorially independent conference for the breakbulk & project cargo industry

Breakbulk Conference - Rectangle Box

Attend Breakbulk25

The premier conference for the global container shipping and supply chain community

Latest News

More News & Analysis

Project cargo sector disadvantaged by lag in AI adoption

Marine insurer group greenlights streamlined eBL vendor approval process

ONE launches domestic repositioning program on inland loads to West Coast